Smart Moulding Control
The Smart Moulding Control (SMC) is an online, real-time quality and production monitoring system, which measures the cavity pressure in injection moulds and controls the production. New generational product monitoring and automatic injection moulding machine controlling is available with our pressure measurement system every day of the week for the 0 ppm scrap rate!
Smart Molding Control (SMC) offers you a complete system that can be used with up to 8, 16, 32 or 64 pressure sensors. The Smart Moulding Control system is available in different types according to the number of sensors used. Up to 8 sensors the SMC8 system, over 8 but maximum 16 sensors the SMC16 system is the right choice. The main difference is that the SMC8 contains one and the SMC16 contains two SMP8. Over 16 but maximum 32 sensors the SMC32, and over 32 but maximum 64 sensors the SMC64 is the right choice. The main difference is that the SMC32 contains one and the SMC64 contains two SMP32.
Amennyiben olyan mérőrendszerre van szüksége, amely a szerszámhoz tartozó fontos információkat annak mozgatása során sem veszíti el, megkönnyítve a gyártás újbóli elindítását, továbbá amivel megvalósítható a fröccsöntő gép online, valós idejű vezérlése, valamint a selejtszázalék 0-ra csökkentése, illetve a hibák utólagos elemzését is lehetővé teszi, akkor válassza a Cavity Eye Smart Moulding Control gyártásfelügyeleti rendszerét!
If you want a measuring system which holds the important information about the mould in the mould socket, so you do not lose any of them while moving the mould, the Cavity Eye Smart Moulding Control is the best choice! If you want an online, real-time quality and production monitoring system, which measures the cavity pressure in injection moulds and controls the production, moreover, creates the possibility for analysis and statistic reports from the measured data, choose Cavity Eye Smart Moulding Control!
Smart Moulding Control 8
Up to 8 sensors
Smart Moulding Control 32
Up to 32 sensors
Smart Moulding Control 16
Up to 16 sensors
Smart Moulding Control 64
Up to 64 sensors
|System type||Max. number of sensors||System content|
|SMC8||8||1 pcs SMP8, 1 pcs SCP412, Central unit with touchscreen and accessories|
|SMC16||16||2 pcs SMP8, 1 pcs SCP412, Central unit with touchscreen and accessories|
|SMC32||32||1 pcs SMP32, 1 pcs SCP412, Central unit with touchscreen and accessories|
|SMC64||64||2 pcs SMP32, 1 pcs SCP412, Central unit with touchscreen and accessories|
The main parts of the Cavity Eye SMC system are the Smart Measuring Plug and the Smart Control plug. These new generation Cavity Eye instruments are special, mobile industrial plugs, which are containing a measuring and controlling device with a microprocessor, so they can also operate independently from the system.
The Cavity Eye Smart Measuring Plug (SMP) is a special data processing unit, with the role of ensuring the communication with the injection moulds equipped with Cavity Eye’s pressure cells. It receives and processes the pressure cell’s signals, then transmits the data to the Smart Control Plug through the central unit (PC and Switch). The memory reading/writing, the sensor signal processing and forwarding are also accomplished by the SMP device. The mould’s cavity pressure is measured by the pressure cells and the signals are received by the SMP, and the processed signals are forwarded to the software on the PC. There are two types SMP according to how many sensors you want to use in the system. The SMP8 is able to process data up to 8 sensors, while the SMP32 is the right choice up to 32 sensors. The SMP is the counterpart of the MPM devices.
The Smart Control Plug is communicating back and forth with the Injection Moulding Machine with 24 V digital signals. The device receives the signals from the injection moulding machine, processes and transmits them to the central unit. Furthermore, it is responsible for transforming the signals sent by the Cavity Eye system to 24V signals and forwarding them to the IMM. The device can control bad part sorting, detect the cycle start, stop the injection machine in case of an error and also can control nozzle valves of the mould.
The different SMC systems accessories are always the same. Only the type and the number of SMP devices are the difference. You can extend the number of measuring plugs or even change the type freely, thus you can use an already owned SMC system not just one, but any number of moulds.
Smart Measuring Plug 8
Up to 8 sensors
Smart Measuring Plug 32
Up to 32 sensors
Smart Control Plug 412
With 4 digital inputs and 12 digital outputs
|Max number of sensors||8||32|
|A/D resolution||32 bit||32 bit|
|Sampling rate||100 Hz||100 Hz|
|Operating temperature range||-40..+85 °C||-40..+85 °C|
|Power supply||48 V (IEEE 802.3af PoE standard)||48 V (IEEE 802.3af PoE standard)|
|Number of digital inputs||4|
|Number of digital outputs||12|
|Operating temperature range||-40..+85 °C|
|Power supply||48 V (IEEE 802.3af PoE standard)|